5 in 1 Metal can cooler with bottle opener, Sublimation ready
-
By A Mystery Man Writer
-
-
4.7(157)
Product Description
Metal can holder for sublimation. White. Insulating metal can holder. 16oz. Includes built in bottle opener on the bottom. Holds the tall, skinny cans, regular can, and bottles. Can be used as a regular tumbler as well with additional screw on slider lid with attached handle, included. Includes screw on top for holding.
Metal can holder for sublimation. White. Insulating metal can holder. 16oz. Includes built in bottle opener on the bottom.
Holds the tall, skinny cans, regular can, and bottles. Can be used as a regular tumbler as well with additional screw on slider lid with attached handle, included. Includes screw on top for holding cans and bottles. (rubber bottom sold separately if desired)
Shiny white sublimation coating that produces vibrant colors. For use in a mug press or convection oven. Convection oven requires the use of shrink wrap to apply pressure during baking, sold separately, and accessories such as rubber bottoms are also available in a separate listing.
***Convection Oven Directions*** PLEASE NOTE: equipment varies and so may your required settings. Please test your own equipment using these baseline recommendations.
Apply sublimation transfer on the surface of the tumbler using heat tape. For full wrap designs, make sure you pull the transfer as tightly as possible around the tumbler, then tape very well along the seam and around the top/bottom of the tumbler. Pulling the tape/transfer as tight as possible with no air pockets. If your transfer does not fully cover the tumbler surface, apply blowout/butcher paper to the entire tumbler so that there is no metal showing on the sides. Apply shrink wrap using a heat gun to shrink it tight to the tumbler. Bake in a convection oven at approximately 385-400 degrees F for 5-6 minutes, turning halfway. **If your tumbler is touching a metal surface during baking, the shrink wrap will be more likely to melt!Remove from oven and immediately remove shrink wrap and transfer. TUMBLER WILL BE HOT!!No sealant is necessary on sublimation tumblers. *Hand washing is recommended as the high heat in many dishwashers may reactivate the heat and cause it to bleed.
For more information on sublimating these, please visit ACC Sublimation Blanks & Designs Facebook group for videos.
Purchase Wholesale skinny can cooler. Free Returns & Net 60 Terms on Faire
5 in 1 Metal can cooler with bottle opener, Sublimation ready blanks R – ACC Sublimation Blanks & Designs
Beer Cozies
4 in 1 Can/Bottle Cooler 16oz Sublimation Blank Tumbler – Easy Tumblers
Bottle Cooler Sleeves Extra Thick Neoprene Stitched Fabric
Metal can holder for sublimation. White. Insulating metal can holder. 16oz, Holds the tall, skinny cans, regular can, and bottles. Can be used as a
4 in 1 Metal can cooler MATTE Sublimation ready blanks RTS, 4 in 1 skinny can holder metal, metal can coolers
➊ This 16 oz 4-in-1 insulated can cooler is a versatile drink holder that can fit different types of cans, slim cans and standard cans, as well as
DOOCU 4-in-1 Sublimation Can Cooler Blanks 16 oz White Stainless Steel Skinny Can Cooler Double-Wall Vacuum Sublimation Tumblers Insulated Can Cooler
Bottle Opener Stainless Steel White Sublimation
Purchase Insulated Metal Can Koozie For Varied Uses
This Tumblers & Water Glasses item by TheNestofRobin has 241 favorites from shoppers. Ships from Lake Helen, FL. Listed on Jan 5, 2024